Why every basketball fan should want a slam cover (Its not just a magazine its a piece of history)

Date:

Share post:

My Journey with the “Slam Cover” Project

Alright, so let’s talk about this “slam cover” thing. It wasn’t some grand invention, you know? It started out of pure, unadulterated annoyance. Every single time the wind picked up, or the mailman was a bit too enthusiastic, WHAM! That mailbox flap would slam shut like it was trying to win a prize for loudest noise on the block. Drove me nuts, especially when I was trying to get some peace and quiet.

Why every basketball fan should want a slam cover (Its not just a magazine its a piece of history)

So, I figured, I gotta do something. My first thought, naturally, was to just buy something. But then I looked online, and everything seemed either flimsy or way too expensive for what it was. Plus, where’s the fun in that? I like tinkering, getting my hands dirty. It’s how you really learn, right? Not by clicking “add to cart.”

My initial ideas were all over the place.

  • Maybe some kind of rubber bumper? Tried that. Peeled off after a week. Useless.
  • Thought about a small hydraulic thingy, like on screen doors. Way too complicated for a simple mailbox flap. Overkill.
  • Even considered just stuffing a rag in there, but that looked terrible and probably wouldn’t last.

Then it hit me. I needed a “slam cover.” Not a cover for the slam, but something to cover the impact point, to cushion it. Simple, effective. That’s usually how the best solutions turn out, isn’t it? People overthink things. Companies overengineer. Sometimes you just need a bit of common sense and some stuff you’ve got lying around.

Getting Down to Brass Tacks

So, I rummaged through my garage. My sacred space of forgotten projects and future masterpieces, as I like to call it. Found a small, thin piece of hard plastic, leftover from some old packaging. Perfect base. Then, I needed padding. An old mousepad! The foamy kind. It was just sitting there, collecting dust. Its time had come.

Here’s basically what I did:

Why every basketball fan should want a slam cover (Its not just a magazine its a piece of history)

First, I cut the plastic to be just a little smaller than the inside of the mailbox flap where it hits the frame. Used a utility knife. Nearly sliced my thumb, but that’s part of the adventure, eh? Always be careful with sharp tools, folks. Seriously.

Then, I cut a piece of the mousepad foam to the same size as the plastic. I needed something to stick ’em together. Found some heavy-duty contact adhesive. That stuff stinks to high heaven, but it works. Applied it, pressed the foam onto the plastic, and put a couple of heavy books on top while it dried. Patience is key with glue, something I’m not always great at, but I managed this time.

The next step was making it look less like a piece of trash glued together. I had some leftover outdoor fabric, kind of a dark grey canvas material, from when I re-covered some patio chairs. Tough stuff. I wrapped the foam-plastic sandwich in this fabric, like a tiny present. Folded the edges neatly, or as neatly as I could, and used more of that lovely contact adhesive to seal it up on the back. It actually started to look pretty decent.

Attaching it was the final challenge. I didn’t want to drill into the mailbox if I could avoid it. So, I went with some super-strong, double-sided outdoor mounting tape. The kind that claims to hold up bricks. Cleaned the inside of the flap and the spot on the mailbox frame really well with alcohol, then stuck my little “slam cover” cushion onto the frame where the flap hits. Pressed it hard for a good minute.

The Glorious Result (and a Bit of Reflection)

And you know what? It worked. Like a charm. The flap still closes, obviously, but now it’s a gentle thud. A satisfying, muffled sound instead of that ear-splitting CRACK. Victory!

Why every basketball fan should want a slam cover (Its not just a magazine its a piece of history)

It’s funny, isn’t it? Sometimes the most irritating little problems can lead to these small, satisfying projects. You don’t need a fancy workshop or a degree in engineering. Just a bit of frustration, a willingness to try, and a look around at what you’ve already got. This “slam cover” cost me basically nothing but a bit of time and some stuff that was otherwise junk. Way better than forking out cash for something mass-produced that probably wouldn’t have worked as well anyway.

So yeah, that was my adventure in creating the slam cover. Simple, effective, and quiet. Finally. Now, what to fix next…

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Related articles

Finding Tristan Hart stuff? This guide shows easiest methods ever!

Getting Started Okay so I kept seeing people ask about Tristan Hart stuff everywhere. Twitter feeds, gaming forums, even...

Visit Circuit de Rouen-Les-Essarts guide for racing fans

Starting the Trip Woke up crazy early with my coffee thermos, grabbed my notebook and camera. Drove three hours...

What is graph x 5 2 and how does it work simple explanation inside

Man, I stumbled into this graph thing totally by accident yesterday. Was digging through some old GitHub repos...

Is LeBron James On Steroids: How NBA Drug Testing Really Works

Okay, let me walk you through what I actually did today, step by step. It started because I...